4/0,4/0,4/0 & 2/0 Copper SER Service Entrance Cable Applications:
Type SE, Style SER Service Entrance may be used as service-entrance conductors and in other applications where SE cables are permitted when installed as specified by dry locations at temperatures up to 90°C.
Conductor:
Stranded conductors: Uncoated copper per ASTM-B3, ASTM-B8, and ASTM-B787
Phase Conductor:
Type THHN conductors Black PVC (polyvinyl chloride), rated to 90°C in wet or dry locations Jacketed with black nylon (polyamide) One phase conductor has a red stripe on its insulation surface for easy polarity identification.
Neutral Conductor:
White PVC (polyvinyl chloride), rated 90°C Jacketed with white nylon (polyamide)
Equipment Ground Conductor:
Bare stranded copper conductor
Jacket:
Gray, sunlight-resistant PVC (polyvinyl chloride) jacket over the complete assembly
4/0,4/0,4/0 & 2/0 Copper SER Service Entrance Cable Standards:
UL 83 (insulated conductors)
UL 854 Service Entrance Cables, File No. 11098
ASTM-B3
ASTM-B8
ASTM-B787
Federal Specification A-A-59544
NFPA70: National Electrical Code
4/0,4/0,4/0 & 2/0 Copper SER Service Entrance Cable Specifications*:
Insulated Conductor Size: 4/0
Bare Ground Size: 2/0 (19)
Outside Diameter: 1.598 inches
Ampacity amps 260 @ 90°C
Net Weight: 2.650 lbs/ft
| Cable Type | Service Entrance Cable |
|---|---|
| Wire Size | 4/0 AWG |
| # of Conductors | 3 Conductors w/ Ground |
| Conductor Material | Bare Copper |
| Stranded or Solid | Stranded |
| O.D. (Inches) | 1.598 |
| Ampacity | 260 |
| Voltage | 600V |
| Temp. Rating | 90°C |
| Insulation Material | PVC – Polyvinyl Chloride |
| Jacket Material | PVC – Polyvinyl Chloride |
| Jacket Color | Gray |
| Direct Burial | No |
| Sunlight Resistant | Yes |
| Location Use | Wet, Dry |
| Indoor/Outdoor Use | Indoor, Outdoor |
| Standards | UL Listed |
